CONFAST 3/8" Threaded Rod Anchor for Wood, Horizontal, 1/4" x 2" (Box of 100)
Product details
| Management number | 215655272 | Release Date | 2026/04/12 | List Price | $70.28 | Model Number | 215655272 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Diameter of Anchor The diameter of the anchor is 1/4". Length Anchor The length of the anchor is 2" Installing a 3/8" CONFAST Threaded Rod Anchor for Wood, Horizontal, 1/4" x 2" Insert the correct nut driver into a 3/8” or 1/2” drill motor. Insert the CONFAST Threaded Rod Hanger into the nut driver. Push the fastener horizontally into the surface of the base material while the drill rotates. Installation is complete once the nut driver spins freely. Nut driver is designed to cam out once the fastener is secured. Note: Minimum Size of Wood Member not less than 2" nominal wide for up to 3-1/2" pipe, not less than 3" nominal wide for 4" & 5" pipe and 2-1/2 ' nominal height for branch lines, 3" nominal height for main lines Maximum RPM for installation is 1200. Do not install the fastener while the drill motor is in the hammer or impact mode, doing so will Destroy holding values.
- INSTALL IN CENTER OF WOOD MEMBER - provides best opportunity for highest holding values
- FAST INSTALLATION - save time from traditional methods
- ONE PIECE DESIGN - reduces installation cost
| UPC | 820274007112 |
|---|---|
| Brand | CONFAST |
| Color | Silver |
| Size Name | 2 inches |
| Item Shape | Rod |
| Unit Count | 1.0 Count |
| Thread Size | 1/4 inch |
| Finish Types | Zinc |
| Grade Rating | Residential |
| Manufacturer | CONFAST |
| Fastener Type | Threaded Rod Anchor |
| Item Diameter | 0.25 Inches |
| Material Type | Carbon Steel, Zinc Plated Carbon Steel |
| Number of Pieces | 100 |
| Screw Head Style | Flat |
| Maximum Shear Strength | 1,000 lbf |
| Compatible Groove Diameter | 0.5 Inches |
Bestseller ranking
Fully Threaded Rods & Studs
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form